江苏省科技期刊可视化阅读平台

导航条

江苏科技信息 ›› 2016, Vol. 33 ›› Issue (24): 56-60.doi: 10.3969/j.issn.1004-7530.2016.24.023

• 论文 • 上一篇    下一篇

复合材料帽型长桁硅橡胶热膨胀成型工艺预浸料内树脂压力研究

吴德财, 刘兴宇   

  1. 上海飞机设计研究院,上海,201210
  • 出版日期:2016-08-25 发布日期:2016-08-25

Research on resin pressure in prepreg stack during thermal expansion process with silicone rubber for the composite M-Stiffener

Wu Decai, Liu Xingyu   

  • Online:2016-08-25 Published:2016-08-25

摘要： 文章通过试验测试，研究了硅橡胶热膨胀成型过程中复合材料帽型长桁内部树脂压力变化过程，并和真空袋成型工艺做对比，研究结果为复合材料结构研制提供参考。

关键词: 复合材料帽型长桁, 热膨胀工艺, 硅橡胶, 预浸料, 树脂压力

Abstract: In this paper, the resin pressure in the prepreg stack of composite M-Stiffener panel during thermal expansion process were measured by tests, and the result was compared with vacuum-bag process. The study can provide references for composite structure manufacture.