江苏省科技期刊可视化阅读平台

导航条

江苏科技信息 ›› 2016, Vol. 33 ›› Issue (10): 13-15.doi: 10.3969/j.issn.1004-7530.2016.10.019

• 论文 • 上一篇    下一篇

柔性加工生产方式下的精细质量管控研究

慕平利   

  1. 河南中烟工业有限责任公司洛阳卷烟厂,河南洛阳,471003
  • 出版日期:2016-04-05 发布日期:2016-04-05

Research on Meticulous Quality Control Based on Flexible Manufacture

Mu Ping li   

  • Online:2016-04-05 Published:2016-04-05

摘要： 通过强化保障机制，优化标准控制，完善质量管理体系；通过建立预防评价机制，完善质量信息传递介质，实施工艺项目“课题制”，强化过程精细化管理；建立问题快速协调机制，制定工艺巡查制度，建立质量责任传导机制，固化生产运作流程，提高柔性加工综合协调能力；通过持续开展质量教育、专业知识培训、技术经验交流，为柔性加工提供人才保障。通过持续实施，产品质量抽检合格率达到100%，同比提高0.11%，各关键环节工序CPK由原来的平均不足1.0提升至1.33以上，产品原辅料消耗显著降低，全年原辅料消耗节约430万元。

关键词: 柔性加工, 多规格, 质量管控, 精细化管理

Abstract: Through strengthening the guarantee mechanism and optimizing the standard control, the quality management system was improved. Through the establishment of prevention evaluation mechanism, improving the quality of information transmission medium and the implementation process of project “research subject”, the meticulous quality control was strengthened. The flexible processing comprehensive coordination ability was improved by establishing the problem of rapid coordination mechanism, establishing process inspection system, establishing quality responsibility conduction mechanism and curing production operation process. Through the continuous development of quality education, professional knowledge training, technical experience and exchange, personnel support was provided. By sustained implementation, product quality sampling pass rate reached 100%, an increase of 0.11%. The CPK of key process increased from 1.0 to more than 1.33. Material consumption decreased significantly. The annual materials consumption savings was 430 million RMB.